TP809 Programming Manual
51
FS
-
[Function]
Select print mode(s) for Kanji characters
[Format]
ASCII
FS
-
n
Hex
1C
2D n
Decimal
28
45
n
[Range]
0
≤
n
≤
2, 48
≤
n
≤
50
[Default]
n = 0
[Description]
Turns on or off underline mode for multi
-
byte code character (Kanji
-
underline), using n
as follows:
[Notes]
￭
Settings of this command affect multilingual characters and user
-
defined characters.
￭
The underline has the same color as the characters.
￭
Even if Kanji underline mode is specified, 90
clockwise
-
rotation characters,
white/black reverse characters, and spaces skipped by HT, ESC $, or ESC \ are not
underlined.
￭
When a character size is changed, an underline width is not changed.
￭
When underline mode is canceled, the following characters are not underlined;
however, an underline width set right before the mode is canceled remains.
￭
Settings of this command are effective until FS ! is executed, ESC @ is executed, the
printer is reset, or the power is turned off.
n
Function
0, 48
Turns off Kanji-underline mode
1, 49
Turns on Kanji-underline mode (1-dot thick)
2, 50
Turns on Kanji-underline mode (2-dots thick)
Summary of Contents for TP809
Page 1: ...TP809 Programming Manual Rev 1 2...
Page 32: ...TP809 Programming Manual 26...
