Steps & Notes
Take out one packet of photo paper (including 5pcs or
10pcs of photo paper and 1pc of blue card), and place
them into the printer as shown on Figure 2. The photo
paper should be placed a er the blue card and its te t
side should face down.
Please note that never place more than 10pcs of photo
paper, and use the photo paper specially for the printer,
use other brands of that may a ect the print uality.
Blue Card
1. If Bluetooth has been unconnected for 5 seconds, the printer will enter sleeping mode,
press the power bu on to awaken it.
2. In sleeping mode, if not awaken the printer within 5 minutes, it will be o automa cally.
3. When using it at the second me, ust click the print icon that the printer will be connected
automa cally and send data to print.
. Do not touch the photo paper during prin ng, or else it may appear stripes.
6
Hold down the power bu on for 3 seconds,
the printer will be turned on.
Open the photo
printer APP
.
Select the printer and then click it to pair automa cally.
Return to “Print Preview” a er connec on is successful.
Click the print icon and enter “Searching
printer”, allow to turn on the Bluetooth.
Start Your Photo Printer
Packing List
Note: The packing items are actually dependent on the order.
USB Interface Po er Bu on
LED Indicator Status
Red LED
Error Status
OFF: Power o
ON: Standby
Slow Flash: Charging
ON: Error (Paper Jam/Out of Paper
/Cover Opened)
Slow Flash: Low power
Blue LED
Basic Status
LED Indicator
Paper Outlet
Paper Loading
Place your hands on both sides of the top cover,
push it towards the direc on as shown on Figure 1.
Assemble the top cover.
Precau ons or Photo Paper
The photo paper is easy to get damp, please use it as soon
as possible a er opening.
Avoid e cessive direct sunlight and over low temperature.
Avoid device damage caused by using non-special paper.
Do not fold or damage the paper.
How to Print
Steps & Notes
Choose “MT53”, select the photos
and enter “Print Preview.”
Click the print icon again and
the printer will start prin ng.
1. When red LED stays on, you can check the detailed error condi on on APP a er connec ng it to the printer.
2. When upda ng the printer rmware, the blue LED will ash uickly.
The blue card is used for color correc on and TPH cleaning. When prin ng a er loading 1 packet of
paper at rst me, the blue card will be automa cally out rstly, and then the photo will be printed out.
Type-C Cable
Photo Paper (5pcs)
Quick Start Guide
The te t side of all the photo
paper should face down.
