Oroya LED Outdoor Light
Instruction Manual
Cat. LBL014KWE, LBL014KBL
1 Specifications
Cat No.
LBL014KWE, LBL014KBL
Supply voltage
230-240V a.c. 50Hz
Input power
12W
Power output
11W
Lumens output
870lm
Colour temperature
Cool White 4000K Nominal
Colour rendering index (CRI)
80+
Beam angle
120
o
Dimmable
No
Lifespan (in open air at 25°C)
25,000h
Protection class
Class II
IP rating
IP65
Size
Ø270 x 90mm
Weight (excl packaging)
0.6kg
2 Installation
1. Remove the cover and diffuser from the fitting by loosening the mounting screws (figure 1).
2. Use the fitting as a template to mark the screw positions onto the wall / ceiling (figure 2).
3. Insert the mains wiring through the silicone grommet located near the terminal block.
4. Install the fitting onto the wall / ceiling (figure 3).
5. Remove the terminal block cover and connect the mains wiring to the terminal block as marked on the fitting. Ensure that the wires are secure and no bare
wires are exposed (figure 4).
6. Install the terminal block cover back onto the terminal block (figure 4).
7. Apply silicone to the grommet area where the mains wiring enters the fitting. This is to ensure the IP rating is maintained.
8. Install the diffuser and cover back onto the fitting and tighten the mounting screws (figures 5, 6 & 7).
9. DO NOT MEGGER TEST.
This product must be installed by a licensed electrician.
