Excel and Linea
Dual USB Charger Mechanism
Cat no. 770USB2PSAMWE
770USB2PSAMBL
770USB2PSXMWE
770USB2PSXMBL
Instruction Sheet
Installation in powerpoints
Installation in switch plates
2. Join wires with corresponding Mains cables in the ‘A’
and ‘N’ terminals of powerpoint.
2b. Configuration with USB mechanism installed
next to a switch on a plate. Connect USB
wires to switch mechanism as per below.
1. Push USB mechanism into extra function hole with arrows facing up as shown.
1. Push USB mechanism into extra function
hole with arrows facing up as shown.
2a. Configuration with USB mechanism stand alone in plate.
Connect USB module wires to the mains cable via insulated
connectors (401 series) as per diagram below.
1
2
Features
Installation
Cat No.
770USB2PSAMWE, 770USB2PSAMBL, 770USB2PSXMWE, 770USB2PSXMBL
Ouput:
5V d.c. ± 5% 4.8 A
Input current 10A (GPO):
230-240V a.c. 50Hz
Mains connections:
Via ‘A’ and ‘N’ wires
Standby power consumption:
‹ 0.07W
Overload protection on output:
5.1A
NOTE: USB charger mechanism can be assembled with Excel and Linea powerpoints and switch plates (if Neutral is available) and
powerpoints with extra function hole.
Mains cable
Insulated
connetors
401
WIRING OF USB DRIVER
TO MAINS WIRING WITH 401
CONNECTOR (REQ. NEUTRAL)
ACTIVE - OUT
(TO LIGHT)
MAINS
ACTIVE
IN
NEUTRAL
IN
USB
USB
MAINS
770USB2PSAMWE
770USB2PSAMBL
770USB2PSXMWE
770USB2PSXMBL
