manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 44 / 286

Share
Download
HPE XP P9000 User Manual Download Page 44

Solaris or Linux

DES-CBC-MD5

Authorization server requirements

The authorization server must satisfy the following requirements if it works together with the
authentication server:

Prerequisite OS

• Windows Server 2003

• Windows Server 2003 R2

• Windows Server 2008

• Windows Server 2008 R2

Prerequisite software

Active Directory

Authentication protocol 

for user for searching

LDAP v3 Simple bind

Connecting two authentication servers

Two authentication servers can be connected. When the servers are connected, the server configurations
must be the same, except for the IP address and the port.

If you search for a server using information registered in the SRV records in the DNS server, confirm that
the following conditions are satisfied:

LDAP server

 conditions:

• The environmental setting for the DNS server is completed at the LDAP server.

• The host name, the port number, and the domain name of the LDAP server are registered in the DNS

server.

Kerberos server

 conditions:

• The host name, the port number, and the domain name of the Kerberos server are registered in the

DNS server.

• You cannot use the SRV records on a RADIUS server.

Because UDP/IP is used to access the RADIUS server, no encrypted communications are available, such
as negotiations between processes. To access the RADIUS server in a secure environment, encryption in
the packet level is required, such as IPsec.

If an LDAP server or Kerberos server is used as an authentication server and works with an authorization
server, the authentication server and the authorization server must use the same host.

If you use RADIUS servers as authentication servers, you can connect two authentication servers
(primary server and secondary server) and one authorization server.

44

Setting up and managing user accounts

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments