manualshive.com logo in svg

HPE XP P9000, User Manual, Page: 20 / 286

Share
Download
HPE XP P9000 User Manual Download Page 20

If you want to enable TLSv1.0 and TLSv1.1 communications, contact Hewlett Packard Enterprise
technical support.

Blocking HTTP communication to the storage system

If the Web server (SVP) supports SSL (HTTPS), the HTTP setting tool allows you to block access to port
80. When you block access to port 80, the connection used to import the certificate from the Web browser
to the Web server (SVP) occurs on port 443 (HTTPS).

If you are using Command View Advanced Edition to access Remote Web Console, blocking HTTP
communication might interfere with that access. Make sure the Command View Advanced Edition can
use SSL communication to access Remote Web Console.

To block HTTP communication:

Procedure

1.

Log off all Remote Web Console Web clients attached to the SVP.

2.

Start both the Remote Web Console Web client and Web browser.

3.

Specify the URL as follows:

https://

IP-address-or-host-name-of-SVP

/cgi-bin/utility/toolpanel.cgi

            

          

4.

In the 

Tool Panel

 dialog box, click 

Set up HTTP Blocking

.

5.

Enter the User ID and Password for the storage administrator, then click 

Logon

. The 

Set up HTTP

Blocking

 dialog box appears.

6.

Click 

OK

. A confirmation dialog box appears.

7.

Click 

OK

 to implement HTTP blocking. When the configuration change is complete, the SVP reboots.

Once the reboot is complete, the 

HTTP Communications Blocked

 dialog box appears. If you want to

cancel the operation and return to the logon dialog box, click 

Cancel

.

It may take 30 or 60 minutes for the Web server to restart. In this case, the 

HTTP Communications

Blocked

 dialog box does not appear and an internal server error occurs, but the setting is actually

completed.

8.

Click 

OK

. You return to the logon dialog box.

Releasing HTTP communication blocking

To release the HTTP communication blocking:

Procedure

1.

Log off of all Remote Web Console Web clients attached to the SVP.

2.

Start both the Remote Web Console Web client and Web browser.

3.

Specify the URL as follows:

https://

IP-address-or-host-name-of-SVP

/cgi-bin/utility/toolpanel.cgi

            

          

4.

In the 

Tool Panel

 dialog box, click 

Release HTTP Blocking

.

20

Setting up Remote Web Console

Summary of Contents for XP P9000































































































































































































































































































Reviews:

No comments