manualshive.com logo in svg

HPE StoreOnce 6500, User Manual

The HPE StoreOnce 6500 is a cutting-edge data storage solution designed to meet the demanding needs of modern enterprises. It offers high capacity and unmatched performance, ensuring seamless backup and recovery. To unlock its full potential, users can easily access the comprehensive User Manual by visiting our website for free downloads.

Share
Download
background image

3.

Click 

Delete

.

4.

Click 

Yes

 in the confirmation box.

StoreOnce Catalyst over Fibre Channel

NOTE: 

The Fibre Channel Settings tab is only relevant to certain StoreOnce System models and will only

be available if your system supports Fibre Channel.

If StoreOnce Catalyst over Fibre Channel is supported on the StoreOnce appliance, the Fibre Channel
Settings tab is available. StoreOnce Catalyst over Fibre Channel functions in the same way as standard
StoreOnce Catalyst (over Ethernet). The backup application will not perceive a difference. However, some
configuration is required to set up the backup and restore connections between the ports on the
StoreOnce System and the ports on the client servers. This is done using the Fibre Channel Settings tab.

When using StoreOnce Catalyst over Fibre Channel:

• Backups are supported on StoreOnce Catalyst over Fibre Channel interface and over Ethernet

networks.

• Appliance-to-appliance connectivity through optimized StoreOnce Catalyst copy jobs is supported over

both Ethernet and Fibre Channel.

• Administrator client privileges are required to run StoreOnce Catalyst over Fibre Channel because it

accesses OS-specific device files associated with StoreOnce Catalyst over Fibre Channel devices.
See 

Client configurations

 for more information.

Configuring StoreOnce Catalyst over Fibre Channel

NOTE: 

If using Fibre Channel, consult the 

HPE Data Availability, Protection and Retention Compatibility

Matrix

 to ensure that client HBAs, switches, Fibre Channel driver, and firmware versions are supported.

Before configuring StoreOnce Catalyst over Fibre Channel, ensure that media/database servers can
communicate with the StoreOnce appliance over a Fibre Channel network. The storage administrator
must ensure that any network segregation, such as zoning, is set up to handle required connectivity
between the server and appliance. See 

Zoning considerations

 for more information.

NOTE: 

When using StoreOnce Catalyst over Fibre Channel:

Running StoreOnce Catalyst over Fibre Channel requires Administrator privileges to access OS-specific
device files associated with StoreOnce Catalyst over Fibre Channel devices.

StoreOnce Catalyst over Fibre Channel functions the same way as standard StoreOnce Catalyst (over
Ethernet); the backup application will not perceive a difference. However, some configuration is required
to set up the backup and restore connections between the ports on the StoreOnce System and the ports
on the client servers. Use the Fibre Channel Settings tab (available within the StoreOnce GUI only if
StoreOnce Catalyst over Fibre Channel is supported).

Fields on the Fibre Channel Settings tab

The tab contains three sections: Identifier information, Ports, and Devices. There is an 

Edit

 button in each

section.

StoreOnce Catalyst over Fibre Channel

85

Summary of Contents for StoreOnce 6500



































































































































































































































































Reviews:

No comments

Related manuals for StoreOnce 6500

Lantronix UDS2100 Quick Start Manual preview
UDS2100
Brand: Lantronix Pages: 6
Lantronix SGX 5150 Manual preview
SGX 5150
Brand: Lantronix Pages: 27
TYAN GC68-B8036 Service Engineer'S Manual preview
GC68-B8036
Brand: TYAN Pages: 106
Artesyn AXP640 Installation And Use Manual preview
AXP640
Brand: Artesyn Pages: 190
ORiNG IDS-5042 Series User Manual preview
IDS-5042 Series
Brand: ORiNG Pages: 67
RaidSonic IB-NAS4210-B Brochure & Specs preview
IB-NAS4210-B
Brand: RaidSonic Pages: 2
BRONKHORST FlowDDE Instruction Manual preview
FlowDDE
Brand: BRONKHORST Pages: 19
Dell Force10 MXL Blade Specifications preview
Force10 MXL Blade
Brand: Dell Pages: 2
Huawei 2180 Product White Paper preview
2180
Brand: Huawei Pages: 39
Huawei 3010 Troubleshooting Manual preview
3010
Brand: Huawei Pages: 188
Huawei 5288 V3 V100R003 User Manual preview
5288 V3 V100R003
Brand: Huawei Pages: 297
Huawei 1288H V5 Quick Start Manual preview
1288H V5
Brand: Huawei Pages: 2
QNAP Turbo NAS TS-219P Troubleshooting Manual preview
Turbo NAS TS-219P
Brand: QNAP Pages: 49
Edimax PS-1206MFg Compatibility Listing preview
PS-1206MFg
Brand: Edimax Pages: 14
XtendLan TC-401L User Manual preview
TC-401L
Brand: XtendLan Pages: 38
HWS Intesis INMBSOCP0010100 User Manual preview
Intesis INMBSOCP0010100
Brand: HWS Pages: 18
Intel SE7221BA1-E User Manual preview
SE7221BA1-E
Brand: Intel Pages: 56
Intel S5000VCL - Server Board Motherboard Technical Product Specification preview
S5000VCL - Server Board Motherboard
Brand: Intel Pages: 74

Brands by name

Popular brands

Load more brands