manualshive.com logo in svg

HPE StoreOnce 6500, User Manual

The HPE StoreOnce 6500 is a cutting-edge data storage solution designed to meet the demanding needs of modern enterprises. It offers high capacity and unmatched performance, ensuring seamless backup and recovery. To unlock its full potential, users can easily access the comprehensive User Manual by visiting our website for free downloads.

Share
Download
background image

IMPORTANT: 

If replication takes place through a firewall, the network administrator must open

(TCP) ports 9387 (Command protocol) and 9388 (Data protocol) to allow the replication traffic to
pass to and from the StoreOnce System.

Bandwidth Limiting tab

This tab allows users with an administrator login to apply a general bandwidth setting and configure
bandwidth limiting windows.

Bandwidth limiting can be used to avoid saturating the WAN with low bandwidth replication to free up
bandwidth for other processes and applications. A minimum of 2Mb/s per concurrent job is
recommended. At least 512Kbps per concurrent job is required for reliable operation. These limits apply
to all outbound replication jobs from this local appliance.

Procedure

1.

Click the 

Bandwidth Limiting

 tab.

2.

In the 

General Bandwidth Limit

 section, check the 

General Limit Enabled

 box.

3.

Determine the recommended general bandwidth limit, which is a simple calculation of:

(Max WAN Speed) x (Max Desired WAN Usage%).

4.

Use the Bandwidth Limit Calculator on this tab to work out limit values. Set the desired WAN speed
and Desired Maximum WAN usage, and the 

Recommended Bandwidth Limit

 field will show the

desired bandwidth value.

5.

In the 

General Bandwidth Limit

 section, click 

Edit

. Enter the value calculated in the 

Bandwidth

Limit Calculator

 in the 

General Bandwidth Limit

 field.

6.

Click 

Edit

.

7.

Configure up to two windows for each day. Use the spinners to select the Start Of Restriction and End
Of Restriction times. Enter the appropriate Bandwidth Limit in each required window. (If you use the
Bandwidth Limit Calculator, enter the value from the 

Recommended Limit

 field.)

NOTE: 

Start and End of Restriction times are set and displayed in UTC regardless of the selected

local time zone so adjust accordingly. For example, U.S. CDT (Central Daylight Time) is five hours
behind UTC. If you are in CDT and want a start time of 6:00 p.m., set the start time to 23:00 (instead of
18:00).

8.

Check the appropriate 

Apply First/Second Restriction

 check boxes. This ensures the specified

times are enabled. If it is not checked, the times are ignored.

NOTE: 

All settings are applied to the StoreOnce System, not for individual jobs. The Bandwidth Limit

windows override the General Limit when the time specified for the window is active. Outside of
Bandwidth Limit windows the General Limit applies.

9.

Click 

Apply

.

Blackout Windows tab

This option allows users with an administrator login to specify times when replication will 

not

 occur, for

example during planned maintenance or heavy network traffic. You can configure multiple blackout
windows.

62

 Bandwidth Limiting tab

Summary of Contents for StoreOnce 6500



































































































































































































































































Reviews:

No comments

Related manuals for StoreOnce 6500

Surveon EonServ 5000 Series User Manual preview
EonServ 5000 Series
Brand: Surveon Pages: 33
I-O DATA HFAS1-XS20U Setup Manual preview
HFAS1-XS20U
Brand: I-O DATA Pages: 49
Buffalo HD-H0.6TGL User Manual preview
HD-H0.6TGL
Brand: Buffalo Pages: 80
B&B Electronics Vlinx VESR4 4 Series User Manual preview
Vlinx VESR4 4 Series
Brand: B&B Electronics Pages: 70
Honeywell Q7055B1047 Installation Instructions Manual preview
Q7055B1047
Brand: Honeywell Pages: 8
Honeywell LANSRLU1 Quick Start User Manual preview
LANSRLU1
Brand: Honeywell Pages: 16
Honeywell MZ-PCSV74 Planning, Installation And Service Manual preview
MZ-PCSV74
Brand: Honeywell Pages: 56
Honeywell Uniformance R300 User Manual preview
Uniformance R300
Brand: Honeywell Pages: 60
Honeywell T610 Planning, Installation And Service Manual preview
T610
Brand: Honeywell Pages: 66
Honeywell HUS-D4-E-Pro User Manual preview
HUS-D4-E-Pro
Brand: Honeywell Pages: 88
Honeywell T320 Planning, Installation And Service Manual preview
T320
Brand: Honeywell Pages: 97
Honeywell XYR301E User Manual preview
XYR301E
Brand: Honeywell Pages: 108
IBM BladeCenter HS22 Supplementary Manual preview
BladeCenter HS22
Brand: IBM Pages: 1
IBM 88728RU Specifications preview
88728RU
Brand: IBM Pages: 4
IBM eServer 250 xSeries Installation Manual preview
eServer 250 xSeries
Brand: IBM Pages: 84
IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual preview
8682 - Eserver xSeries 350
Brand: IBM Pages: 174
IBM 325 8639 Hardware Maintenance Manual preview
325 8639
Brand: IBM Pages: 145
IBM B50 User Manual preview
B50
Brand: IBM Pages: 221

Brands by name

Popular brands

Load more brands