IMPORTANT:
When switching from None or User authentication mode to AD authentication
mode, HPE recommends logging out and then back into the Windows client where the share is
mounted. This ensures the new authentication settings of the CIFS server are enforced.
NOTE:
The StoreOnce System does not support creating shares from Windows Computer
Management Consoles. Shares must be created from the StoreOnce GUI or CLI.
The StoreOnce appliance only supports the Shared Folders utility within the Windows Computer
Management. Any other Windows Computer Management utilities are not supported.
Assign AD users as administrators for the CIFS server
After adding the StoreOnce device to the AD domain, a new
Local Administrators
section appears on
the lower half of the
CIFS server
tab. This section allows the addition of domain users or groups with
administrative privileges to the CIFS server. This section provides a way of implementing Delegated
Administration, which is not available for the StoreOnce device from the Active Directory Management
tool.
IMPORTANT:
When adding AD domain users as local administrators through the CIFS server tab,
the users are automatically created as Local Administrators whether or not they are Administrator
users on the AD domain.
Procedure
1.
On the
CIFS server
tab, to add a user, click
Add User or Group
.
2.
Under
Members
, enter the Domain User who will manage the StoreOnce CIFS server as an
Administrator.
IMPORTANT:
The user is added using the AD logon name. This name is available from the user
account information from the Active Directory Management tool. Right-click the domain user from
the domain controller, select Properties, and check the domain user account information. Both
user logon formats are accepted (for example, <domain_user@domain> or <domain
\domain_user>). The user will be resolved against the domain controller database.
If a user is not configured, or has already been added to the list, an error will be given.
3.
Click
Update
.
Add AD groups as administrators for the StoreOnce server
Procedure
1.
On the
CIFS server
tab, to add a group, click
Add User or Group
.
2.
Enter the credentials of the Domain group who will manage the StoreOnce CIFS server as
administrators and click
Update
.
Removing AD users or groups as administrators from the StoreOnce CIFS server
Procedure
1.
Select the user or group that requires deletion from the list of
Local Administrators
.
Assign AD users as administrators for the CIFS server
51
