manualshive.com logo in svg

HPE StoreEasy 1X60 Storage, Administrator'S Manual, Page: 138 / 183

Share
Download
HPE StoreEasy 1X60 Storage Administrator'S Manual Download Page 138

• At POST and in the OS, iLO performs an orderly shutdown if a cautionary temperature level is detected. If

the server hardware detects a critical temperature level before an orderly shutdown occurs, the server
performs an immediate shutdown.

• When the Thermal Shutdown feature is disabled in the BIOS/Platform Configuration (RBSU), iLO does not

perform an orderly shutdown when a cautionary temperature level is detected. Disabling this feature does
not disable the server hardware from performing an immediate shutdown when a critical temperature level
is detected.

CAUTION:

A thermal event can damage server components when the Thermal Shutdown feature is disabled in
the BIOS/Platform Configuration (RBSU).

Installing high-performance fans

CAUTION:

Caution: To prevent damage server, ensure that all DIMM latches are closed and locked before installing
the fans.

CAUTION:

Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.

Procedure

1. Extend the server from the rack

.

2. Remove the access panel

.

3.

If installed, remove all fan blanks.

4. Remove the air baffle

.

5.

Remove all standard fans.

138

 Installing high-performance fans

Summary of Contents for StoreEasy 1X60 Storage
























































































































































































Reviews:

No comments