HPE SN3000B Hardware Reference Manual Download Page 76 | Manualshive

Page: 76 / 95

background image

Website

Link

Contact Hewlett Packard Enterprise Worldwide

www.hpe.com/assistance

Subscription Service/Support Alerts

www.hpe.com/support/e-updates

Software Depot

www.hpe.com/support/softwaredepot

Customer Self Repair

www.hpe.com/support/selfrepair

Insight Remote Support

www.hpe.com/info/insightremotesupport/docs

Serviceguard Solutions for HP-UX

www.hpe.com/info/hpux-serviceguard-docs

Single Point of Connectivity Knowledge (SPOCK)
Storage compatibility matrix

www.hpe.com/storage/spock

Storage white papers and analyst reports

www.hpe.com/storage/whitepapers

Customer self repair

Hewlett Packard Enterprise customer self repair (CSR) programs allow you to repair your product. If a
CSR part needs to be replaced, it will be shipped directly to you so that you can install it at your
convenience. Some parts do not qualify for CSR. Your Hewlett Packard Enterprise authorized service
provider will determine whether a repair can be accomplished by CSR.

For more information about CSR, contact your local service provider or go to the CSR website:

www.hpe.com/support/selfrepair

Remote support

Remote support is available with supported devices as part of your warranty or contractual support
agreement. It provides intelligent event diagnosis, and automatic, secure submission of hardware event
notifications to Hewlett Packard Enterprise, which will initiate a fast and accurate resolution based on your
product’s service level. Hewlett Packard Enterprise strongly recommends that you register your device for
remote support.

For more information and device support details, go to the following website:

www.hpe.com/info/insightremotesupport/docs

Documentation feedback

Hewlett Packard Enterprise is committed to providing documentation that meets your needs. To help us
improve the documentation, send any errors, suggestions, or comments to Documentation Feedback
(

[email protected]

). When submitting your feedback, include the document title, part number,

edition, and publication date located on the front cover of the document. For online help content, include
the product name, product version, help edition, and publication date located on the legal notices page.

76

Customer self repair

«
...
74
75
76
77
78
...
»

Summary of Contents for SN3000B
































































































Reviews:

No comments

Related manuals for SN3000B

Brand: PureLink Pages: 10

Brand: AdLuminis Pages: 8

FOS-3124 SERIES

Brand: CTS Pages: 223

Brand: Eaton Pages: 2

Brand: Delta Electronics Pages: 31

Brand: Steren Pages: 13

Brand: JetNet Pages: 20

Brand: S+S Pages: 16

8 PORT SMART SWITCH CE 232D4SS8

Brand: B&B Electronics Pages: 29

Smart view IC-1304-IO

Brand: C&C TECHNIC Pages: 2

Brand: nedis Pages: 24

Brand: NETGEAR Pages: 8

Brand: DSPPA Pages: 31

Brand: Dusun Pages: 18

Brand: Enable-IT Pages: 49

Brand: KDS Pages: 10

Brand: 3One data Pages: 9

Brand: Black Box Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands