HPE ProLiant XL740f Gen9, User And Maintenance Manual

Page: 42 / 74

Removal and replacement procedures 42
7.
Remove the front panel I/O board.
To replace the component, reverse the removal procedure.
I/O slot card
To remove the component:
1.
Power down the server (on page 10 ).
2.
Disconnect all peripheral cables from the server.
3.
Remove the server (on page 11 ).
4.
Remove the access panel (on page 12 ).
5.
Disconnect the NIC-Y cable (" NIC-Y connectors " on page 54 ).
6.
Remove the I/O slot card assembly.