HPE ProLiant Thin Micro TM200, User Manual

Page: 56 / 71

Smart Update Manager
SUM is a product used to install and update firmware, drivers, and systems software on ProLiant servers.
SUM provides a GUI, a command-line scriptable interface, and an interactive command-line scriptable
interface. The interfaces allow you to deploy firmware, drivers, and software for supported servers.
For more information about SUM, see the product page on the Hewlett Packard Enterprise website .
To download SUM, see the Hewlett Packard Enterprise website .
To access the Smart Update Manager User Guide , see the Hewlett Packard Enterprise Information
Library .
UEFI System Utilities
Most servers have a UEFI Class 2 implementation and support both UEFI Boot Mode (default) and Legacy
BIOS Boot Mode. The boot mode is configured through the Boot Mode setting in UEFI System Utilities. Note
that servers with a UEFI Class 3 implementation support UEFI Boot Mode only and do not have a Boot Mode
setting in UEFI System Utilities.
The UEFI System Utilities is embedded in the system ROM. The UEFI System Utilities enable you to perform
a wide range of configuration activities, including:
• Configuring system devices and installed options
• Enabling and disabling system features
• Displaying system information
• Selecting the primary boot controller
• Configuring memory options
• Selecting a language
• Launching other preboot environments such as the Embedded UEFI Shell
For more information, see the UEFI System Utilities user guide on the Hewlett Packard Enterprise website .
To access mobile-ready online help for the UEFI System Utilities and UEFI Shell, scan the QR code at the
bottom of the screen. For on-screen help, press the
F1 key.
Using UEFI System Utilities
To use the System Utilities, use the following keys.
Action Key
Access System Utilities F9 during server
POST
Navigate menus Up and Down
arrows
Select items Enter
Save selections F10
Access Help for a highlighted configuration
option
1
F1
1
Scan the QR code on the screen to access online help for the UEFI
System Utilities and UEFI Shell.
Default configuration settings are applied to the server at one of the following times:
• Upon the first system power-up
• After defaults have been restored
56 Smart Update Manager