Cause
The new system settings are not supported.
Action
Check the system logs to determine what changes were made, and then change the settings back to the
original configuration.
Errors occur after the system software is changed
Symptom
Errors occur after the system software is changed.
Action
Change the settings back to the original configuration. If more than one setting was changed, change the
settings one at a time to isolate the cause of the issue.
Errors occur after an application is installed
Symptom
Errors occur after an application is installed on a server.
Action
• Check the application log and operating system log for entries indicating why the software failed.
• Check system settings to determine if they are the cause of the error. You might need to obtain the
settings from the server setup utility and manually set the software switches. For more information,
see the application documentation, the vendor website, or both.
• Check for overwritten files. To determine which files are added by the application, see the application
documentation.
• Reinstall the application.
• Be sure you have the most current drivers.
ROM issues
Remote ROM flash issues
Command-line syntax error
Symptom
If the correct command-line syntax is not used, an error message describing the incorrect syntax is
displayed and the program exits.
Cause
Incorrect command-line is used.
132
Errors occur after the system software is changed
