Replacing the system board
Prerequisites
Before you perform this procedure, make sure that you have a T-15 and T-30 Torx screwdrivers available.
Procedure
1.
Install the system board.
2.
Install the processor heatsink assembly:
a.
Locate and align the Pin 1 indicator on the processor frame and the socket.
b.
Align the processor heatsink assembly with the heatsink alignment posts and gently lower it down
until it sits evenly on the socket.
The heatsink alignment posts are keyed. The processor will only install one way.
A standard heatsink is shown, your heatsink might look different.
60
Removal and replacement procedures
Summary of Contents for ProLiant DX190r Gen10
Page 21: ...Customer self repair 21...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...
