Remove the secondary riser cage thermal brackets
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless the
correct thermal brackets are installed.
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
Procedure
1.
Remove the rear thermal bracket.
2.
Remove the middle thermal bracket.
3.
Remove the riser slot 4 thermal bracket.
Removal and replacement procedures
31
Summary of Contents for ProLiant DX190r Gen10
Page 21: ...Customer self repair 21...
Page 22: ...22 Customer self repair...
Page 23: ...Customer self repair 23...