HPE ProLiant DL388 Gen10, Maintenance And Service Manual

Page: 162 / 169

CAUTION: This equipment is designed to permit the connection of the earthed conductor of the DC
supply circuit to the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment must be connected directly to the DC supply system earthing electrode conductor or
to a bonding jumper from an earthing terminal bar or bus to which the DC supply system earthing
electrode conductor is connected.
• This equipment must be located in the same immediate area (such as adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply circuit
and the earthing conductor, and also the point of earthing of the DC system. The DC system must be
earthed elsewhere.
• The DC supply source is to be located within the same premises as the equipment.
• Switching or disconnecting devices must not be in the earthed circuit conductor between the DC
source and the point of connection of the earthing electrode conductor.
HPE 800W Flex Slot Scalable Persistent Memory Power Supply
Specification Value
Input requirements
Rated input voltage
100 VAC to 127 VAC
200 VAC to 240 VAC
240 VDC for China only
Rated input frequency 50 Hz to 60 Hz
Not applicable to 240 VDC
Rated input current
5.8 A at 100 VAC
4.5 A at 200 VAC
3.8 A at 240 VDC for China only
Maximum rated input power
580 W at 100 VAC
900 W at 200 VAC
912 W at 240 VDC for China only
BTUs per hour
1,979 at 100 VAC
3,071 at 240 VAC
3,112 at 240 VDC for China only
Power supply output
Table Continued
162 Specifications