HPE ProLiant DL388 Gen10 Maintenance And Service Manual Download Page 104 | Manualshive

Page: 104 / 169

background image

Intelligent Provisioning operation

Intelligent Provisioning includes the following components:

• Critical boot drivers

• Active Health System (AHS)

• Erase Utility

• Deployment Settings

IMPORTANT:

• Although your server is preloaded with firmware and drivers, Hewlett Packard Enterprise

recommends updating the firmware upon initial setup. Also, downloading and updating the latest
version of Intelligent Provisioning ensures the latest supported features are available.

• For ProLiant servers, firmware is updated using the Intelligent Provisioning Firmware Update utility.

• Do not update firmware if the version you are currently running is required for compatibility.

NOTE:

Intelligent Provisioning does not function within multihomed configurations. A multihomed host is one

that is connected to two or more networks or has two or more IP addresses.

Intelligent Provisioning provides installation help for the following operating systems:

• Microsoft Windows Server

• Red Hat Enterprise Linux

• SUSE Linux Enterprise Server

• VMware ESXi/vSphere Custom Image

• ClearOS

Not all versions of an OS are supported. For information about specific versions of a supported operating
system, see the OS Support Matrix on the Hewlett Packard Enterprise website (

http://www.hpe.com/info/

).

HPE Insight Remote Support

Hewlett Packard Enterprise strongly recommends that you register your device for remote support to enable
enhanced delivery of your Hewlett Packard Enterprise warranty, HPE support services, or Hewlett Packard
Enterprise contractual support agreement. Insight Remote Support supplements your monitoring continuously
to ensure maximum system availability by providing intelligent event diagnosis, and automatic, secure
submission of hardware event notifications to Hewlett Packard Enterprise, which will initiate a fast and
accurate resolution, based on your product’s service level. Notifications can be sent to your authorized
Hewlett Packard Enterprise Channel Partner for onsite service, if configured and available in your country.

For more information, see

Insight Remote Support and Insight Online Setup Guide for ProLiant Servers and

BladeSystem c-Class Enclosures

on the

Hewlett Packard Enterprise website

. Insight Remote Support is

available as part of Hewlett Packard Enterprise Warranty, HPE support services, or Hewlett Packard
Enterprise contractual support agreement.

104

Diagnostic tools

«
...
102
103
104
105
106
...
»

Summary of Contents for ProLiant DL388 Gen10










































































































































































Reviews:

No comments

Related manuals for ProLiant DL388 Gen10

Brand: IBM Pages: 7

NovaScale T820 F2

Brand: Bull Pages: 34

Brand: ImageTech Pages: 44

STRATOS S400-X44E

Brand: Quanta Computer Pages: 251

Brand: Sollae Systems Pages: 27

8668 - Eserver xSeries 232

Brand: IBM Pages: 182

AcquiLite A7810-0

Brand: Obvius, LLC Pages: 29

Brand: Ioimage Pages: 72

IMS-LANTIME M500

Brand: Meinberg Pages: 162

Brand: Allnet Pages: 12

Brand: LG-Ericsson Pages: 54

InfiniteStorage 3000

Brand: Silicon Graphics Pages: 50

Brand: IBM Pages: 4

Brand: Inspur Pages: 112

Brand: Inspur Pages: 170

Brand: AirLive Pages: 221

Brand: Gigabyte Pages: 161

FusionServer 1288H V7

Brand: xFusion Digital Technologies Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands