HPE ProLiant DL385 Gen10, Maintenance And Service Manual

Page: 39 / 166

3. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. Remove the air baffle.
Release the full-length expansion board retainer
Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack.
• Remove the server from the rack.
4. Remove the access panel.
5. Removing the air baffle.
6. Remove the air baffle diverters.
Removal and replacement procedures
39