HPE ProLiant DL20 Gen10 Plus, User Manual

Page: 10 / 212

iLO iLO Service Port Service Port
The Service Port is a USB port with the label iLO iLO on supported servers and compute modules.
To find out if your server or compute module supports this feature, see the server specifications document at the following website:
https://www.hpe.com/info/qs
https://www.hpe.com/info/qs.
When you have physical access to a server, you can use the Service Port to do the following:
Download the Active Health System Log to a supported USB flash drive.
When you use this feature, the connected USB flash drive is not accessible by the host operating system.
Connect a client (such as a laptop) with a supported USB to Ethernet adapter to access the following:
iLO web interface
Remote console
iLO RESTful API
CLI
Hewlett Packard Enterprise recommends the HPE USB to Ethernet Adapter (part number Q7Y55A).
When you use the iLO Service Port:
Actions are logged in the iLO event log.
The server UID flashes to indicate the Service Port status.
You can also retrieve the Service Port status by using a REST client and the iLO RESTful API.
You cannot use the Service Port to boot any device within the server, or the server itself.
You cannot access the server by connecting to the Service Port.
You cannot access the connected device from the server.
For more information about the iLO Service Port, see the iLO user guide at the following website: https://www.hpe.com/support/ilo- https://www.hpe.com/support/ilo-
docs docs.
For more information, see the Anywhere Access to HPE ProLiant Gen10 Servers Anywhere Access to HPE ProLiant Gen10 Servers video.
iLO Service Port 10