HPE ProLiant DL20 Gen10 Plus, User Manual, Page: 142 / 212

Installing the M.2 SSD pass-through card option Installing the M.2 SSD pass-through card option
The dual-slot M.2 SSD pass-through card option supports both SATA and NVMe SSDs in 2280 and 22110 form factors.
Mixed SSD type installation is not supported.
When M.2 SATA SSDs are installed, this server supports Intel VROC SATA.
Software RAID for M.2 NVMe SSDs is not supported. Use NVMe SSDs for storage only.
CAUTION: CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have the following items available:
Phillips No. 1 screwdriver
1/4" slotted screwdriver
Procedure Procedure
Install the drives onto the M.2 SSD pass-through card Install the drives onto the M.2 SSD pass-through card
1. If you are installing M.2 2280 SSD on the pass-through card slot 1:
a. Remove the SSD mounting screw (callout 1) and the hex screw (callout 2) from the 22110 standoff.
Retain all screws for future use.
b. Install the hex screw on the 2280 standoff.
Installing the M.2 SSD pass-through card option 142