3
iLO Service Port
4
USB 3.0 port
Serial number/iLO information pull tab
The serial number/iLO information pull tab is double-sided. One side shows the server serial number and
the QR code labels. The other side shows the default iLO account information.
Use a mobile device to scan the QR code label to display the server mobile product page (
). This page contains links to server setup information, spare part
numbers, QuickSpecs, troubleshooting resources, and other useful product links.
Front panel LEDs and buttons
• Front panel LEDs and buttons in an LFF chassis
• Front panel LEDs and buttons in an SFF chassis
Item
Description
Status
1
UID button/LED
Solid blue = Activated Flashing blue:
• 1 flash per second = Remote management or firmware
upgrade in progress
• 4 flashes per second = iLO manual reboot sequence
initiated
• 8 flashes per second = iLO manual reboot sequence in
progress
Off = Deactivated
Table Continued
Component identification
11
Summary of Contents for ProLiant DL180
