manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 86

Trunk Configuration

Trunk Configuration

You can use the Trunk Configuration page to view and edit trunks. The number of trunks on the system
is fixed, and all trunks are disabled by default. You can enable, disable, and edit settings for each
trunk. Click 

Trunk

 > 

Trunk Configuration

 in the navigation pane. 

Figure 57. Trunk Configuration Page

The following information displays for each trunk.

Table 38. Trunk Configuration Fields 

Field

Description

Trunk

The trunk ID.

Name

The configurable trunk name, which is the same as the trunk ID by default.

Type

Trunks can be either dynamic or static, but not both:

Dynamic—Dynamic trunks use the Link Aggregation Control Protocol (LACP, IEEE

standard 802.3ad). An LACP-enabled port automatically detects the presence of other

aggregation-capable network devices in the system and exchanges Link Aggregation

Control Protocol Data Units (LACPDUs) with links in the trunk. The PDUs contain infor-

mation about each link and enable the trunk to maintain them.

Static—Static trunks are assigned to a bundle by the administrator. Members do not

exchange LACPDUs. A static trunk does not require a partner system to be able to

aggregate its member ports. This is the default port type.

Note that the loop protection feature is not supported on dynamic trunks. If loop protection is 

enabled on a static trunk and the trunk is changed to a dynamic trunk, loop protection is 

disabled.

Admin Mode

Whether the trunk is administratively enabled or disabled. This feature is enabled by default.

Link Status

Indicates the operational status of the trunk interface, which can be Up, Up (SFP) for ports 

with an installed SFP transceiver, or Down. 

Members

The ports that are members of the trunk. By default, no ports belong to any trunk.

Active Ports

The ports that are actively participating members of a trunk. A member port that is 

operationally or administratively disabled or does not have a link is not an active port.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Gefen HD-441 User Manual preview
HD-441
Brand: Gefen Pages: 11
D-Link xStack DES-3500 Series Cli Manual preview
xStack DES-3500 Series
Brand: D-Link Pages: 260
D-Link DXS-3600 Series Reference Manual preview
DXS-3600 Series
Brand: D-Link Pages: 48
D-Link DXS-3400 SERIES Quick Start Manual preview
DXS-3400 SERIES
Brand: D-Link Pages: 3
D-Link Web Smart Switch DGS-1210-16 Product Manual preview
Web Smart Switch DGS-1210-16
Brand: D-Link Pages: 71
D-Link DGS-1016A Datasheet preview
DGS-1016A
Brand: D-Link Pages: 3
D-Link DGS-1100-26MP Getting Started Manual preview
DGS-1100-26MP
Brand: D-Link Pages: 56
D-Link xStack DES-3800 Series Cli Manual preview
xStack DES-3800 Series
Brand: D-Link Pages: 326
D-Link xStack DES-3526 Cli Manual preview
xStack DES-3526
Brand: D-Link Pages: 222
D-Link DGS-1008G Quick Install Manual preview
DGS-1008G
Brand: D-Link Pages: 2
D-Link DXS-1210 Series Manual preview
DXS-1210 Series
Brand: D-Link Pages: 20
SMSC LAN9312 Datasheet preview
LAN9312
Brand: SMSC Pages: 458
Comtrend Corporation ES-7211PoE User Manual preview
ES-7211PoE
Brand: Comtrend Corporation Pages: 2
Eaton AGswitch Instructions Manual preview
AGswitch
Brand: Eaton Pages: 36
Comtech EF Data CRS-280 Installation And Operation Manual preview
CRS-280
Brand: Comtech EF Data Pages: 70
TP-Link LiteWave LS105G Installation Manual preview
LiteWave LS105G
Brand: TP-Link Pages: 3
Banner PICO-GUARD SFI-D1EDPXT6 Instruction Manual preview
PICO-GUARD SFI-D1EDPXT6
Brand: Banner Pages: 2
WTI IPS-400 User Manual preview
IPS-400
Brand: WTI Pages: 56

Brands by name

Popular brands

Load more brands