manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 46

Spanning Tree

Spanning Tree

Spanning Tree Protocol (STP) is a Layer 2 protocol that provides a tree topology for switches on a
bridged LAN. STP allows a network to have redundant paths without the risk of network loops. STP
uses the spanning-tree algorithm to provide a single path between end stations on a network. When
STP is enabled, bridges on a network exchange bridge protocol data units (BPDUs) to communicate
changes in the network topology and to provide information that helps determine the optimal paths
between network segments.
HPE OfficeConnect 1920S series switches support STP versions IEEE 802.1D (STP), and 802.1w
(Rapid STP, or RSTP). RSTP reduces the convergence time for network topology changes to about 3
to 5 seconds from the 30 seconds or more for the IEEE 802.1D STP standard. RSTP is intended as a
complete replacement for STP, but can still interoperate with switches running the STP protocol by
automatically reconfiguring ports to STP-compliant mode if they detect STP protocol messages from
attached devices.

Spanning Tree Switch Configuration

To display the Spanning Tree Switch Configuration page, click 

Switching

 > 

Spanning Tree

 in the nav-

igation pane, and make sure the 

Configuration

 tab is selected. This page includes information about

global STP settings and interface status information.

Figure 25. Spanning Tree Switch Configuration Page 

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Ruby Tech GS-5124C Technical Specifications preview
GS-5124C
Brand: Ruby Tech Pages: 2
H3C S6520X-EI Series Manual preview
S6520X-EI Series
Brand: H3C Pages: 34
Kramer DigiTOOLS VS-41USB User Manual preview
DigiTOOLS VS-41USB
Brand: Kramer Pages: 8
TRENDnet TK-205K - PS/2 KVM Switch (German) Anleitung Zur Schnellinstallation preview
TK-205K - PS/2 KVM Switch
Brand: TRENDnet Pages: 11
Hisselektronik Safeline 2000 Light Manual For Programmering preview
Safeline 2000 Light
Brand: Hisselektronik Pages: 9
Videplus JAR-SW16-P300 User Manual preview
JAR-SW16-P300
Brand: Videplus Pages: 13
Pakedge SE-18 Quick Start Manual preview
SE-18
Brand: Pakedge Pages: 12
ADS Technologies USBH-604 Connection Manual preview
USBH-604
Brand: ADS Technologies Pages: 2
Radware Alteon 5208 Memory Upgrade Procedure preview
Alteon 5208
Brand: Radware Pages: 4
LevelOne GTL-2690 Installation Manual preview
GTL-2690
Brand: LevelOne Pages: 76
Generac Power Systems TRANSFER SWITCH Warranty Information Booklet preview
TRANSFER SWITCH
Brand: Generac Power Systems Pages: 1
Maiwe MIEN2206 User Manual preview
MIEN2206
Brand: Maiwe Pages: 14
Rocstor Y10A251-B1 User Manual preview
Y10A251-B1
Brand: Rocstor Pages: 2
Opencockpits BREAKERF Installation & User Manual preview
BREAKERF
Brand: Opencockpits Pages: 30
Larson Electronics EPS-1XPB-1XPL-M1-24V Instruction Manual preview
EPS-1XPB-1XPL-M1-24V
Brand: Larson Electronics Pages: 2
FS S5850-24S2C Quick Start Manual preview
S5850-24S2C
Brand: FS Pages: 43
JABSCO 18680-0000 Manual preview
18680-0000
Brand: JABSCO Pages: 2
IC Audio EV-5000 User Manual preview
EV-5000
Brand: IC Audio Pages: 41

Brands by name

Popular brands

Load more brands