manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Page 44

Port Mirroring

Port Mirroring Summary

The Port Mirroring Summary page displays summary information for all port mirroring sessions. To dis-
play the Port Mirroring Summary page, click 

Switching

 > 

Port Mirroring 

in the navigation pane and

click the 

Summary

 tab.

Figure 23. Port Mirroring Summary Page

Table 14. Port Mirroring Summary Fields

Field

Description

Session ID

The port mirroring session ID. The number of sessions allowed is platform specific.

Admin Mode

The administrative mode for the selected port mirroring session. If the mode is disabled, the 

configured source is not mirroring traffic to the destination.

Probe Port

The interface that receives traffic from all configured source ports.

Src VLAN

The VLAN configured to mirror traffic to the destination. You can configure one source VLAN 

per session. The source VLAN can also be a remote VLAN.

Mirrored Port

The ports configured to mirror traffic to the destination. You can configure multiple source 

ports per session.

Direction

The type of traffic on the source port (or source ports) or VLAN that is sent to the specified 

destination. A source VLAN mirrors all received and transmitted packets to the destination. 

Possible values for source ports are:

Tx and Rx – Both ingress and egress traffic.

Rx – Ingress traffic only.

Tx – Egress traffic only.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

IBM BNT Installation Manual preview
BNT
Brand: IBM Pages: 88
IBM E12 Quick Installation Manual preview
E12
Brand: IBM Pages: 2
wavin neoHub Quick Start Manual preview
neoHub
Brand: wavin Pages: 4
Clever Little Box Wi-View 300V User Manual preview
Wi-View 300V
Brand: Clever Little Box Pages: 15
Tripp Lite B155-002-DP-V2 Owner'S Manual preview
B155-002-DP-V2
Brand: Tripp Lite Pages: 12
DANLERS CEFLA PIR DALIP Installation Notes preview
CEFLA PIR DALIP
Brand: DANLERS Pages: 2
enbrighten 58433 Manual preview
58433
Brand: enbrighten Pages: 2
Voith BTS-Ex Installation And Operating Manual preview
BTS-Ex
Brand: Voith Pages: 98
Little Giant RS-5 Instruction Sheet preview
RS-5
Brand: Little Giant Pages: 8
PowerShield PSMBSR10K Quick Manual preview
PSMBSR10K
Brand: PowerShield Pages: 2
CoolGear CG-UC31PD4H Product Manual preview
CG-UC31PD4H
Brand: CoolGear Pages: 8
A SYSTEMS AV800HD User Manual preview
AV800HD
Brand: A SYSTEMS Pages: 80
IOGear GUD3C8K2P Quick Start Manual preview
GUD3C8K2P
Brand: IOGear Pages: 10
Icy Box IB-RP103 Quick Installation Manual preview
IB-RP103
Brand: Icy Box Pages: 10
H3C S1850 Series Getting Started Manual preview
S1850 Series
Brand: H3C Pages: 19
GenerLink MA23-N Operating Manual preview
MA23-N
Brand: GenerLink Pages: 16
Clear-Com MS-232 User Manual preview
MS-232
Brand: Clear-Com Pages: 21
Festo SME-8M-xxx-24V series Instructions preview
SME-8M-xxx-24V series
Brand: Festo Pages: 2

Brands by name

Popular brands

Load more brands