Port Mirroring
43
Configuring the Port Mirroring Session Destination
1.
From the Port Mirroring page, select the Session ID for of the port mirroring session to configure.
2.
Click
Configure Destination
to display the
Destination Configuration
page.
Figure 22. Configure Port Mirroring Session Destination
3.
To configure a port that receives the mirrored traffic, select
Interface
in the
Type
field, or select
None
to remove the configuration from a port.
4.
If
Interface
is selected from the
Type
field, specify the port number of the interface to receive mir-
rored traffic.
5.
Click
Apply
to apply the changes to the system.
Removing Source Ports from a Session
1.
From the Port Mirroring page, select the Session ID for of the port mirroring session to configure.
2.
Select one or more source ports to remove from the session.
3.
Click
Remove Source
.
The source ports are removed from the port mirroring session, and the device is updated.
NOTE:
A port will be removed from a VLAN or LAG when it becomes a destination mirror.
