Page 24
System Time Pages
System Time Pages
You click
Setup Network
>
System Time
to display the web pages for configuring the system clock,
SNTP client functionality, system time zone, and daylight saving time settings.
System Time
The System Time page displays the current time, time zone, and Daylight Saving Time settings, and
enables you to configure the time display format. To display the System Time page, click
Setup Net-
work
>
System Time
in the navigation pane, and ensure that the
Clock
tab is selected.
Figure 7.
System Time Page
Table 4.
System Time Fields
Field
Description
Current Time
Time
The current time. This value is determined by an SNTP server. When SNTP is disabled, the
system time increments from 00:00:00, 1 Jan 1970, which is set at bootup.
Date
The current date.
Time Source
The source from which the time and date is obtained:
SNTP—The time has been acquired from an SNTP server.
No Time Source—The time has been either manually configured or not configured at all.
This is the default selection.
Time Format
Select
24 Hour
(“military” time, the default) or
12 Hour
to specify the time display format.
