manualshive.com logo in svg

HPE OfficeConnect 1920S 24G series, Management And Configuration Manual

The HPE OfficeConnect 1920S 24G series is a high-performance networking device designed for small and medium-sized businesses. Get comprehensive guidance on managing and configuring this product by downloading the free "Management And Configuration Manual" from our website. Unlock the full potential of your device effortlessly.

Share
Download
background image

Factory Defaults

195

Factory Defaults

You can use the Reset Configuration page to restore all settings to their factory default values. All con-
figuration changes, including those that were previously saved, are reset in the running system by this
action.If the switch is configured to use DHCP to acquire its IP address, the address may change upon
restart; you will need to determine the address before logging back in to the management utility.
To display the Factory Defaults page, click 

Diagnostics

 > 

Factory Defaults

.

Figure 141. Reset Configuration Page 

Click 

Reset 

to restore the system to the default settings. 

CAUTION:

It is recommended that you back up the current configuration file prior to restoring the
factory defaults configuration. See 

“Dual Image Configuration” on page 200

 for instruc-

tions.

Summary of Contents for OfficeConnect 1920S 24G series


















































































































































































































Reviews:

No comments

Related manuals for OfficeConnect 1920S 24G series

Eaton COOPER POWER SERIES Maintenance Instructions Manual preview
COOPER POWER SERIES
Brand: Eaton Pages: 32
Keithley 2750 User Manual preview
2750
Brand: Keithley Pages: 452
IBM 8275-416 User Manual preview
8275-416
Brand: IBM Pages: 156
steute 1177987 Mounting And Wiring Instructions preview
1177987
Brand: steute Pages: 20
Ruby Tech Web-Smart GS-1208M Specifications preview
Web-Smart GS-1208M
Brand: Ruby Tech Pages: 2
GE ZB4001 Manual preview
ZB4001
Brand: GE Pages: 2
Sarowin HDSW0016M1 User Manual preview
HDSW0016M1
Brand: Sarowin Pages: 9
V7 MPEGS24 User Manual preview
MPEGS24
Brand: V7 Pages: 35
Zamel GRG-01 Quick Start Manual preview
GRG-01
Brand: Zamel Pages: 2
Sams RSS-10v User Manual For Use And Maintenance preview
RSS-10v
Brand: Sams Pages: 14
Cabletron Systems SmartSwitch 2500 Reference Manual preview
SmartSwitch 2500
Brand: Cabletron Systems Pages: 402
Velleman HQ-Power VMS4 Manual preview
HQ-Power VMS4
Brand: Velleman Pages: 5
Eaton STS 2000A Installation And Operation Manual preview
STS 2000A
Brand: Eaton Pages: 120
Endress+Hauser MPC2000 MPC2 Operating Instructions Manual preview
MPC2000 MPC2
Brand: Endress+Hauser Pages: 25
Qlogic SANbox 5000 Series Instructions preview
SANbox 5000 Series
Brand: Qlogic Pages: 2
Clas Ohlson EMT445PCS Instruction Manual preview
EMT445PCS
Brand: Clas Ohlson Pages: 4
ddtop UQK-400 Operation Manual preview
UQK-400
Brand: ddtop Pages: 10
ELPRO TZ04 Installation And Use Manual preview
TZ04
Brand: ELPRO Pages: 8

Brands by name

Popular brands

Load more brands