D Default Startup Characteristics and Naming Conventions
Each NS2100 system uses
“Default Naming Conventions” (page 109)
and ships with the following
default startup characteristics:
$SYSTEM disks residing in either SAS disk enclosures:
SAS and SAS CG Disk Enclosures
•
Systems with only two to three Storage CLIM/CLIM CGs and two SAS/SAS CG disk
enclosures with the disks in these locations:
SAS/SAS CG Disk Enclosure
CLIM/CLIM CG X1
Location
Bay
Enclosure
Slot
Module
Group
Path
1
1
3
2
100
Primary
2
1
3
2
100
Backup
3
2
3
2
100
Mirror
4
2
3
2
100
Mirror-Backup
•
Configured system load paths
•
Enabled command interpreter input (CIIN) function
If the automatic system load is not successful, additional paths for loading are available in the
boot task. Using one load path, the system load task attempts to use another path and keeps
trying until all possible paths have been used or the system load is successful. These 16 paths
are available for loading and are listed in the order of their use by the system load task:
ServerNet Fabric
Destination
Processor
Source Disk
Description
Load Path
X
0
$SYSTEM-P
Primary
1
Y
0
$SYSTEM-P
Primary
2
X
0
$SYSTEM-P
Backup
3
Y
0
$SYSTEM-P
Backup
4
X
0
$SYSTEM-M
Mirror
5
Y
0
$SYSTEM-M
Mirror
6
X
0
$SYSTEM-M
Mirror backup
7
Y
0
$SYSTEM-M
Mirror backup
8
X
1
$SYSTEM-P
Primary
9
Y
1
$SYSTEM-P
Primary
10
X
1
$SYSTEM-P
Backup
11
Y
1
$SYSTEM-P
Backup
12
X
1
$SYSTEM-M
Mirror
13
Y
1
$SYSTEM-M
Mirror
14
108
Default Startup Characteristics and Naming Conventions
