83
Views
DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
ICMP/UDP jitter operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
value
: Specifies the maximum number of hops that the probe packets can traverse, in the range of 1
to 255.
Usage guidelines
The
route-option bypass-route
command sets the TTL to 1 for probe packets. If you configure both
the
route-option bypass-route
and
ttl
commands for an operation, the
ttl
command does not take
effect.
For a successful UDP tracert operation, make sure the maximum number of hops is not smaller than
the value set in the
init-ttl
command.
Examples
# Set the maximum number of hops to 16 for probe packets in the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] ttl 16
type
Use
type
to specify an NQA operation type and enter its view.
Syntax
type
{
dhcp
|
dlsw
|
dns
|
ftp
|
http
|
icmp-echo
|
icmp-jitter
|
path-jitter
|
snmp
|
tcp
|
udp-echo
|
udp-jitter
|
udp-tracert
|
voice
}
Default
No operation type is specified.
Views
NQA operation view
Predefined user roles
network-admin
Parameters
dhcp
: Specifies the DHCP operation type.
