275
Usage guidelines
After you configure the minimum sampling interval, make sure the trigger sampling interval is greater
than or equal to the minimum sampling interval.
Changing the minimum sampling interval does not affect the existing instances. If the minimum
sampling interval is changed to a value smaller than the sampling interval of a trigger, the existing
instances of the trigger will continue to be sampled at its interval.
Examples
# Set the minimum sampling interval to 50 seconds.
<Sysname> system-view
[Sysname] snmp mib event sample minimum 50
Related commands
frequency
snmp mib event trigger
snmp mib event trigger
Use
snmp mib event trigger
to create a trigger and enter its view, or enter the view of an existing
trigger.
Use
undo snmp mib event trigger
to remove a trigger.
Syntax
snmp mib event trigger owner
trigger-owner name trigger-name
undo snmp mib event trigger owner
trigger-owner name trigger-name
Default
No trigger exists.
Views
System view
Predefined user roles
network-admin
Parameters
trigger-owner
: Specifies an owner for a trigger, which must be an existing SNMPv3 user.
trigger
-name: Specifies a name for a trigger, a case-sensitive string of 1 to 32 characters.
Usage guidelines
A trigger is identified by its owner and name. In trigger view, you can specify a monitored object and
set an interval for sampling the object. An event is triggered when the sampled object meets the
trigger condition.
