8
Table 2 Command output
Field Description
Ping6(56 data bytes)
2001::1 --> 2001::2, press CTRL_C
to break
An ICMPv6 echo reply with a data length of 56 bytes is sent from
2001::1 to 2001::2.
Press
Ctrl+C
to abort the ping IPv6 operation.
56 bytes from 2001::2,
icmp_seq=1 hlim=64 dst=2001::1
idx=3 time=62.000 ms
Received ICMPv6 echo replies from the device whose IPv6 address
is 2001::2.
•
The number of data bytes is 56.
•
The packet sequence is 1.
•
The hop limit value is 64.
•
The destination address is 2001::1. Specify the
-v
keyword to
display this field.
•
The index for the packet inbound interface is 3. Specify the
-v
keyword to display this field.
•
The response time is 62 milliseconds.
--- Ping6 statistics for 2001::2 ------
Statistics on data received and sent in an IPv6 ping operation.
5 packet(s) transmitted
Number of ICMPv6 echo requests sent.
5 packet(s) received
Number of ICMPv6 echo replies received.
0.0% packet loss
Percentage of unacknowledged packets to the total packets sent.
round-trip min/avg/max/ std-dev
=4.000/25.000/62.000/20.000 ms
Minimum/average/maximum/standard deviation response time, in
milliseconds.
tracert
Use
tracert
to trace the path the packets traverse from source to destination.
Syntax
tracert
[
-a
source-ip
|
-f
first-ttl
|
-m
max-ttl
|
-p
port
|
-q
packet-number
|
-t
tos
| {
-topology
topo-name
|
-vpn-instance
vpn-instance-name
[
-resolve-as
{
global
|
none
|
vpn
} ] } |
-w
timeout
]
*
host
Views
Any view
Predefined user roles
network-admin
Parameters
-a
source-ip
: Specifies an IP address of the device as the source IP address of probe packets. If this
option is not specified, the source IP address of probe packets is the primary IP address of the
outbound interface.
-f first
-
ttl
: Specifies the TTL of the first packet sent to the destination. The value range is 1 to 255, and
the default is 1. It must be no greater than the value of the
max
-
ttl
argument.
-m max
-
ttl
: Specifies the maximum number of hops allowed for a probe packet. The value range is 1
to 255, and the default is 30. It must be no smaller than the value of the
first
-
ttl
argument.
