HPE FlexNetwork HSR6800 series Security Command Reference Download Page 493

Page: 493 / 538

480

If you do not specify the

ip-address

option, the command displays information about all online

GMs in the specified GDOI KS group.

If you do not specify any parameter, the command displays information about all online GMs in all
GDOI KS groups.

Examples

# Display information about all online GMs in all GDOI KS groups.

<Sysname> display gdoi ks members

Group Name: farg

Group member ID : 80.1.1.98

Group member version : 1.0

Group ID : 7777

Key server ID : 90.1.1.1

Rekeys sent : 0

Rekey retries : 0

Rekey ACKs received : 0

Rekey ACKs missed : 0

Group Name: abcd

Group member ID : 80.1.1.100

Group member version : 1.0

Group ID : 8888

Key server ID : 90.1.1.1

Group member ID : 80.1.1.101

Group member version : Unknown

Group ID : 8888

Key server ID : 90.1.1.1

Table 85 Command output

Field Description

Group Name

GDOI KS group name.

Group member ID

ID of the GM in the GDOI KS group.

Group member version

GM version. If no GM version is obtained, this field displays

Unknown

Group ID

ID of the GDOI KS group.

Key server ID

ID of the KS with which the GM will register itself.

Rekeys sent

Number of rekey messages sent successfully.

Rekeys retries

Number of rekey messages retransmitted.

Rekey ACKs received

Number of rekey ACKs received.

Rekey ACLs missed

Number of rekey ACKs missed.

display gdoi ks policy

Use

display gdoi ks policy

to display policy information for GDOI KS groups.

Summary of Contents for FlexNetwork HSR6800 series



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands

HPE FlexNetwork HSR6800 series, Security Command Reference

Search results

Summary of Contents for FlexNetwork HSR6800 series

Reviews:

Related manuals for FlexNetwork HSR6800 series

Brands by name

Popular brands