353
Usage guidelines
To make sure the SFTP client and the SFTP server can communicate with each other, and to
improve the manageability of SFTP clients in the authentication service, Hewlett Packard Enterprise
recommends that you specify a loopback interface as the source interface.
Examples
# Specify the source IP address of the SFTP client as
192.168.0.1
.
<Sysname> system-view
[Sysname] sftp client source ip 192.168.0.1
Related commands
display sftp client source
sftp ipv6
Use
sftp ipv6
to establish a connection to an IPv6 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp ipv6
server
[
port-number
] [
vpn-instance
vpn-instance-name
] [
identity-key
{
dsa
|
rsa
} |
prefer-compress
{
zlib
|
zlib-openssh
} |
prefer-ctos-cipher
{
3des
|
aes128
|
des
} |
prefer-ctos-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} |
prefer-kex
{
dh-group-exchange
|
dh-group1
|
dh-group14
} |
prefer-stoc-cipher
{
3des
|
aes128
|
des
} |
prefer-stoc-hmac
{
md5
|
md5-96
|
sha1
|
sha1-96
} ] *
In FIPS mode:
sftp ipv6
server
[
port-number
] [
identity-key
rsa
|
prefer-ctos-cipher
{
aes128
|
aes256
} |
prefer-ctos-hmac
{
sha1
|
sha1-96
} |
prefer-kex
dh-group14
|
prefer-stoc-cipher
{
aes128
|
aes256
} |
prefer-stoc-hmac
{
sha1
|
sha1-96
} ] *
Views
User view
Default command level
3: Manage level
Parameters
server
: Specifies an IPv6 server by its address or host name, a case-insensitive string of 1 to 46
characters.
port
-
number
: Specifies the port number of the server, in the range of 0 to 65535. The default is 22.
vpn-instance
vpn-instance-name
: Specifies the MPLS L3VPN to which the server belongs, where
the
vpn-instance-name
argument is a case-sensitive string of 1 to 31 characters. If the server is on
the public network, do not specify this option.
identity-key
: Specifies the algorithm for publickey authentication, either
dsa
or
rsa
. In non-FIPS
mode, the algorithm is either
dsa
or
rsa
. In FIPS mode, the algorithm is
rsa
.
•
dsa
: Specifies the public key algorithm
dsa.
•
rsa
: Specifies the public key algorithm
rsa
.
prefer-compress
: Specifies the preferred compression algorithm. By default, the compression
algorithm is not used.
•
zlib
: Specifies the compression algorithm ZLIB.
•
zlib-openssh
: Specifies the compression algorithm [email protected].
