HPE FlexNetwork HSR6800 series, Security Command Reference

Page: 364 / 538

351
•
dh-group-exchange : Specifies the key exchange algorithm
diffie-hellman-group-exchange-sha1. This keyword is not available in FIPS mode.
•
dh-group1 : Specifies the key exchange algorithm diffie-hellman-group1-sha1.This keyword is
not available in FIPS mode.
•
dh-group14 : Specifies the key exchange algorithm diffie-hellman-group14-sha1.
prefer-stoc-cipher : Specifies the preferred server-to-client encryption algorithm. The default is
aes128 .
prefer-stoc-hmac : Specifies the preferred server-to-client HMAC algorithm. The default is sha1-96 .
Usage guidelines
When the server adopts publickey authentication to authenticate a client, the client must get the local
private key for digital signature. In non-FIPS mode, because the publickey authentication uses either
RSA or DSA algorithm, you must specify the public key algorithm of the client (by using the
identity-key keyword) in order to get the correct local private key.
In non-FIPS mode, the default algorithms are as follows:
•
The algorithm for publickey authentication is dsa .
•
The preferred client-to-server encryption algorithm is aes128 .
•
The preferred client-to-server HMAC algorithm is sha1-96 .
•
The preferred key exchange algorithm is dh-group-exchange .
•
The preferred server-to-client encryption algorithm is aes128 .
•
The preferred server-to-client HMAC algorithm is sha1-96 .
In FIPS mode, the default algorithms are as follows:
•
The algorithm for publickey authentication is rsa .
•
The preferred client-to-server encryption algorithm is aes128 .
•
The preferred client-to-server HMAC algorithm is sha1-96 .
•
The preferred key exchange algorithm is dh-group14 .
•
The preferred server-to-client encryption algorithm is aes128 .
•
The preferred server-to-client HMAC algorithm is sha1-96 .
Examples
# Connect to SFTP server 10.1.1.2, using the following connection scheme:
•
The preferred key exchange algorithm is dh-group1 .
•
The preferred server-to-client encryption algorithm is aes128 .
•
The preferred client-to-server HMAC algorithm is md5 .
•
The preferred server-to-client HMAC algorithm is sha1-96 .
<Sysname> sftp 10.1.1.2 prefer-kex dh-group1 prefer-stoc-cipher aes128 prefer-ctos-hmac
md5 prefer-stoc-hmac sha1-96
Input Username:
sftp client ipv6 source
Use sftp client ipv6 source to specify the source IPv6 address or source interface for the SFTP
client.
Use undo sftp client ipv6 source to remove the configuration.
Syntax
sftp client ipv6 source { interface interface-type interface-number | ipv6 ipv6-address }