20
Default
The default authorization method for the ISP domain is used for portal users.
Views
ISP domain view
Default command level
2: System level
Parameters
local
: Performs local authorization.
none
:
Does not perform any authorization exchange. In this case, an authenticated portal user can
access the network directly.
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The specified RADIUS scheme must have been configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure ISP domain
test
to use local authorization for portal users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal local
# Configure ISP domain
test
to use RADIUS scheme
rd
for authorization of portal users and use
local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization portal radius-scheme rd local
Related commands
•
local-user
•
authorization
default
•
radius
scheme
authorization ppp
Use
authorization ppp
to configure the authorization method for PPP users.
Use
undo authorization ppp
to restore the default.
Syntax
authorization ppp
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
undo authorization ppp
Default
The default authorization method for the ISP domain is used for PPP users.
