16
•
authorization
default
•
hwtacacs
scheme
authorization default
Use
authorization default
to configure the default authorization method for an ISP domain.
Use
undo authorization default
to restore the default.
Syntax
authorization default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
local
] |
local
|
none
|
radius-scheme
radius-scheme-name
[
local
] }
undo authorization default
Default
The default authorization method for the ISP domain of an ISP domain is
local
.
Views
ISP domain view
Default command level
2: System level
Parameters
hwtacacs-scheme
hwtacacs-scheme-name
: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local
: Performs local authorization.
none
: Does not perform any authorization exchange. After passing authentication, non-login users
can access the network, FTP users can access the root directory of the device, and other login users
can access only the commands of Level 0.
radius-scheme
radius-scheme-name
: Specifies a RADIUS scheme by its name, a case-insensitive
string of 1 to 32 characters.
Usage guidelines
The specified RADIUS or HWTACACS scheme must have been configured.
The default authorization method is used for all users who support the specified authorization
method and have no specific authorization method configured.
The RADIUS authorization configuration takes effect only when the authentication method and
authorization method of the ISP domain use the same RADIUS scheme.
Examples
# Configure the default authorization method for ISP domain
test
to use RADIUS authorization
scheme
rd
and use local authorization as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authorization default radius-scheme rd local
Related commands
•
local-user
•
hwtacacs
scheme
•
radius
scheme
