271
outbound: 12345 (0x3039) [ESP]
tunnel:
flow:
# Display information about IPsec tunnels in aggregation mode.
<Sysname> display ipsec tunnel
total tunnel: 2
------------------------------------------------
connection id: 4
perfect forward secrecy:
SA's SPI:
inbound : 2454606993 (0x924e5491) [ESP]
outbound : 675720232 (0x2846ac28) [ESP]
tunnel :
local address: 44.44.44.44
remote address : 44.44.44.45
flow :
as defined in acl 3001
Table 44 Command output
Field Description
connection id
Connection ID, used to uniquely identify an IPsec Tunnel.
perfect forward secrecy
Perfect forward secrecy, indicating which DH group is to be used for fast
negotiation mode in IKE phase 2.
SA's SPI
SPIs of the inbound and outbound SAs.
tunnel
Local and remote addresses of the tunnel.
flow
Data flow protected by the IPsec tunnel, including source IP address,
destination IP address, source port, destination port and protocol.
as defined in acl 3001
The IPsec tunnel protects all data flows defined by ACL 3001.
encapsulation-mode
Use
encapsulation-mode
to set the encapsulation mode that the security protocol uses to
encapsulate IP packets.
Use
undo encapsulation-mode
to restore the default.
Syntax
encapsulation-mode
{
transport
|
tunnel
}
undo
encapsulation-mode
Default
A security protocol encapsulates IP packets in tunnel mode.
Views
IPsec transform set view
Default command level
2: System level
