80
Task
Command
Display sub-TLV information for IS-IS TE.
display isis mpls te configured-sub-tlvs
[
process-id
]
Display network information in an IS-IS TEDB.
display isis mpls te network
[ [
level-1
|
level-2
] |
local
|
lsp-id
lsp-id
]* [
process-id
]
Display IS-IS tunnel interface information.
display isis mpls te tunnel
[
level-1
|
level-2
]
[
process-id
]
Display DS-TE information.
display mpls te ds-te
Display bandwidth information on MPLS
TE-enabled interfaces.
display
mpls te link-management
bandwidth-allocation
[
interface
interface-type
interface-number
]
Display MPLS TEDB information.
display mpls te tedb
{ {
isis
{
level-1
|
level-2
} |
ospf
area
area-id
} |
link
ip-address
|
network
|
node
[
local
|
mpls-lsr-id
] |
summary
}
Display information about MPLS TE tunnel
interfaces.
display mpls te tunnel-interface
[
tunnel number
]
Display link and node information in an OSPF
TEDB.
display
ospf
[
process-id
] [
area
area-id
]
mpls
te
advertisement
[
originate-router
advertising-router-id
|
self-originate
]
Display network information in an OSPF TEDB.
display
ospf
[
process-id
] [
area
area-id
]
mpls
te
network
[
originate-router
advertising-router-id
|
self-originate
]
Display OSPF tunnel interface information.
display
ospf
[
process-id
] [
area
area-id
]
mpls
te
tunnel
Reset the automatic bandwidth adjustment
function.
reset
mpls te auto-bandwidth-adjustment timers
MPLS TE configuration examples
Establishing an MPLS TE tunnel over a static CRLSP
Network requirements
Switch A, Switch B, and Switch C run IS-IS.
Establish an MPLS TE tunnel over a static CRLSP from Switch A to Switch C.
The MPLS TE tunnel requires a bandwidth of 2000 kbps. The maximum bandwidth of the link that the
tunnel traverses is 10000 kbps. The maximum reservable bandwidth of the link is 5000 kbps.
