369
Step
Command
Remarks
PW when the primary PW
recovers, and the wait time
for the switchover.
PW to the primary PW.
5.
Configure an LDP PW and
enter VSI LDP PW view.
peer
ip-address
[
pw-id
pw-id
]
[
no-split-horizon
|
pw-class
class-name
|
tunnel-policy
tunnel-policy-name
] *
By default, no LDP PW is
configured.
6.
Configure a backup LDP PW
and enter VSI LDP backup
PW view.
backup-peer ip-address
[
pw-id
pw-id
] [
pw-class
class-name
|
tunnel-policy
tunnel-policy-name
]
*
By default, no backup LDP PW is
configured.
If you have configured a default
PW ID for the VSI with the
default-pw-id
command, you
can use the default PW ID
without providing a PW ID in the
backup-peer
command. If no
default PW ID is configured, you
must provide a PW ID in the
backup-peer
command.
7.
Return to user view.
return
N/A
8.
Manually switch traffic of the
specified PW to its backup
PW.
l2vpn switchover peer ip-addres
s
pw-id
pw-id
N/A
Configuring MAC address learning
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VSI view.
vsi
vsi-name
N/A
3.
Enable MAC address
learning for the VSI.
mac-learning enable
By default, MAC address learning is
enabled for a VSI.
Displaying and maintaining VPLS
Execute
display
commands in any view and
reset
commands in user view.
Task
Command
Display LDP PW label information.
display l2vpn ldp
[
peer ip-address
[
pw-id pw-id
] |
vsi
vsi-name
] [
verbose
]
Display L2VPN forwarding information.
display l2vpn forwarding
{
ac | pw
} [
vsi vsi-name
] [
slot
slot-number
] [
verbose
]
Display MAC address table information for
one or all VSIs.
display l2vpn mac-address
[
vsi
vsi-name
] [
dynamic
]
[
count
]
Display L2VPN PW information.
display
l2vpn
pw
[
vsi
vsi-name
] [
protocol
{
bgp
|
ldp
|
static
} ] [
verbose
]
Display PW class information.
display l2vpn pw-class
[
class-name
]
Display Ethernet service instance
information.
display l2vpn service-instance
[
interface interface-type
interface-number
[
service-instance instance-id
] ]
