321
Step
Command
Remarks
3.
Enter cross-connect view.
connection connection-name
N/A
4.
Bind the Ethernet service
instance on the interface to
the cross-connect.
ac interface interface-type
interface-number
service-instance
instance-id
[
access-mode
{
ethernet
|
vlan
} ]
By default, no Ethernet service
instance is bound to the
cross-connect.
To bind an Ethernet service instance to a BGP cross-connect:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter cross-connect group
view.
xconnect-group group-name
N/A
3.
Enter cross-connect group
auto-discovery view.
auto-discovery bgp
N/A
4.
Enter site view.
site site-id
[
range range-value
]
[
default-offset
default-offset-value
]
N/A
5.
Enter auto-discovery
cross-connect view.
connection
remote-site-id
remote-site-id
N/A
6.
Bind the Ethernet service
instance on the interface to
the BGP cross-connect.
ac interface interface-type
interface-number
service-instance
instance-id
[
access-mode
{
ethernet
|
vlan
} ]
By default, no Ethernet service
instance is bound to the BGP
cross-connect.
Configuring PW redundancy
This task includes the following configurations:
•
Create a backup PW for the primary PW.
•
Specify whether to switch traffic from the backup PW to the primary PW when the primary PW
recovers, and specify the wait time for the switchover.
•
Manually perform a PW switchover.
Configuring static PW redundancy
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter cross-connect group
view.
xconnect-group group-name
N/A
3.
Enter cross-connect view.
connection connection-name
N/A
4.
(Optional.) Specify whether
to switch traffic from the
backup PW to the primary
PW when the primary PW
recovers, and specify the
wait time for the switchover.
revertive
{
wtr wtr-time
|
never
}
By default, traffic is immediately
switched back from the backup
PW to the primary PW when the
primary PW recovers.
