HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 38 / 407

27
Step Command Remarks
2. Create an NQA operation
and enter NQA operation
view.
nqa entry admin-name
operation-tag
By default, no NQA operations
exist.
3. Specify an NQA operation
type and enter its view.
type { dhcp | dlsw | dns | ftp |
http | icmp-echo | snmp | tcp |
udp-echo }
The collaboration feature is not
available for the ICMP jitter, path
jitter, UDP tracert, UDP jitter, or
voice operations.
4. Configure a reaction entry.
reaction item-number
checked-element probe-fail
threshold-type consecutive
consecutive-occurrences
action-type
trigger-only
By default, no reaction entry is
configured.
You cannot modify the content of
an existing reaction entry.
5. Return to system view.
quit N/A
6. Associate Track with NQA.
See High Availability
Configuration Guide .
N/A
7. Associate Track with an
application module.
See High Availability
Configuration Guide .
N/A
Configuring threshold monitoring
This feature allows you to monitor the NQA operation running status.
Threshold types
An NQA operation supports the following threshold types:
•
average —If the average value for the monitored performance metric either exceeds the upper
threshold or goes below the lower threshold, a threshold violation occurs.
•
accumulate —If the total number of times that the monitored performance metric is out of the
specified value range reaches or exceeds the specified threshold, a threshold violation occurs.
•
consecutive —If the number of consecutive times that the monitored performance metric is out
of the specified value range reaches or exceeds the specified threshold, a threshold violation
occurs.
Threshold violations for the average or accumulate threshold type are determined on a per NQA
operation basis. The threshold violations for the consecutive type are determined from the time the
NQA operation starts.
Triggered actions
The following actions might be triggered:
•
none —NQA displays results only on the terminal screen. It does not send traps to the NMS.
•
trap-only —NQA displays results on the terminal screen, and meanwhile it sends traps to the
NMS.
•
trigger-only —NQA displays results on the terminal screen, and meanwhile triggers other
modules for collaboration.
The DNS operation does not support the action of sending trap messages.
Reaction entry
In a reaction entry, configure a monitored element, a threshold type, and an action to be triggered to
implement threshold monitoring.
The state of a reaction entry can be invalid, over-threshold, or below-threshold.
•
Before an NQA operation starts, the reaction entry is in invalid state.