316
Figure 87 Network diagram
Configuration procedure
1.
Configure remote packet capture on GigabitEthernet 1/0/1. Set the RPCAP service port
number to 2014.
<Switch> packet-capture remote interface gigabitethernet 1/0/1 port 2014
2.
Display captured packets on the PC:
a.
Start Wireshark and select
Capture
>
Options
.
b.
Select
Remote
from the
Interface
list.
c.
Enter IP address
10.1.1.1
and port number of
2014
, and click
OK
.
d.
Click
Start
.
The captured packets are displayed on the Wireshark client.
Figure 88 Displaying the captured packets on the Wireshark client
Feature image-based packet capture configuration example
Network requirements
As shown in
, capture the following incoming IP packets on GigabitEthernet 1/0/1:
•
Packets forwarded through the CPU.
•
Packets that are sourced from 192.168.56.1 0 and are forwarded through chips.
Network
Network
Switch
PC
Wireshark client
GE1/0/1
10.1.1.1/24
Summary of Contents for FlexNetwork 10500 SERIES
Page 224: ...213 ...
Page 311: ...300 Now the system can record log information to the specified file ...
