HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 206 / 407

195
Event type Description
Track
Track event occurs when the state of the track entry changes from Positive to Negative
or Negative to Positive. If you specify multiple track entries for a policy, EAA triggers
the policy only when the state of all the track entries changes from Positive to Negative
or Negative to Positive.
If you set a suppress time for a policy, the timer starts when the policy is triggered. The
system does not process the messages that report the track entry Positive-to-Negative
or Negative-to-Positive state change until the timer times out.
Action
You can create a series of order-dependent actions to take in response to the event specified in the
monitor policy.
The following are available actions:
•
Executing a command.
•
Sending a log.
•
Enabling an active/standby switchover.
•
Executing a reboot without saving the running configuration.
User role
For EAA to execute an action in a monitor policy, you must assign the policy the user role that has
access to the action-specific commands and resources. If EAA lacks access to an action-specific
command or resource, EAA does not perform the action and all the subsequent actions.
For example, a monitor policy has four actions numbered from 1 to 4. The policy has user roles that
are required for performing actions 1, 3, and 4. However, it does not have the user role required for
performing action 2. When the policy is triggered, EAA executes only action 1.
For more information about user roles, see RBAC in Fundamentals Configuration Guide .
Runtime
Policy runtime limits the amount of time that the monitor policy can run from the time it is triggered.
This setting prevents system resources from being occupied by incorrectly defined policies.
EAA environment variables
EAA environment variables decouple the configuration of action arguments from the monitor policy
so you can modify a policy easily.
An EAA environment variable is defined as a < variable_name variable _ value > pair and can be used
in different policies. When you define an action, you can enter a variable name with a leading dollar
sign (
$variable_name ). EAA will replace the variable name with the variable value when it performs
the action.
To change the value for an action argument, modify the value specified in the variable pair instead of
editing each affected monitor policy.
EAA environment variables include system-defined variables and user-defined variables.
System-defined variables
System-defined variables are provided by default, and they cannot be created, deleted, or modified
by users. System-defined variable names start with an underscore (_) sign. The variable values are
set automatically depending on the event setting in the policy that uses the variables.
System-defined variables include the following types:
•
Public variable —Available for any events.
•
Event-specific variable —Available only for a type of event.