HPE FlexNetwork 10500 SERIES, Configuration Manual

Page: 143 / 407

132
Step Command Remarks
6. (Optional.) Set the
notification lifetime.
snmp-agent trap life
seconds
The default notification
lifetime is 120 seconds.
Displaying the SNMP settings
Execute display commands in any view.
Task Command
Display SNMP agent system information.
display snmp-agent sys-info [ contact | location |
version ] *
Display SNMP agent statistics.
display snmp-agent statistics
Display the local engine ID.
display snmp-agent local-engineid
Display SNMP group information. display snmp-agent group [ group-name ]
Display remote engine IDs.
display snmp-agent remote { ipv4-address | ipv6
ipv6-address }
Display basic information about the notification
queue.
display snmp-agent trap queue
Display the modules that can generate notifications
and their notification enabling status.
display snmp-agent trap-list
Display SNMPv3 user information.
display snmp-agent usm-user [ engineid engineid
| username user-name | group group-name ] *
Display SNMPv1 or SNMPv2c community
information. (This command is not supported in FIPS
mode.)
display snmp-agent community [ read | write ]
Display MIB view information.
display snmp-agent mib-view [ exclude | include |
viewname view-name ]
Display SNMP MIB node information.
display snmp-agent mib-node [ details |
index-node | trap-node | verbose ]
Display SNMP contexts. display snmp-agent context [ context-name ]
SNMPv1/SNMPv2c configuration example
The SNMPv1 configuration procedure is the same as the SNMPv2c configuration procedure. This
example uses SNMPv1, and is not available in FIPS mode.
Network requirements
As shown in Figure 50 , the NMS (1.1.1.2/24) uses SNMPv1 to manage the SNMP agent (1.1.1.1/24),
and the agent automatically sends notifications to report events to the NMS.