Manual version: 5P101-20171120
BOM: 3123A1NA
Part number: 5200-4100
iv
Product
code
Description
Central
wavelength
(nm)
Connector
Cable
specifica
tions
Modal
bandwidth
Maximum
transmission
distance
JL286A
HPE X140
40G QSFP+
LC LR4L 2km
SM
Transceiver
Four lanes:
•
1271
•
1291
•
1311
•
1331
LC
9/125 µm
SMF
N/A
2 km (1.24
miles)
JL306A
HPE X140
40G QSFP+
LC ER4 40km
SM
Transceiver
Four lanes:
•
1271
•
1291
•
1311
•
1331
LC
9/125 µm
SMF
N/A
40 km (24.86
miles)
NOTE:
PC is the acronym for physical contact. A PC-polished connector has the fiber end face polished flat.
Table 6 QSFP+ cables available for the QSFP+ ports
Product
code
Description
Cable length
Data
rate
JG326A
HPE X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable
1 m (3.28 ft)
40
Gbps
JG327A
HPE X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable
3 m (9.84 ft)
JG328A
HPE X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable
5 m (16.40 ft)
JL287A
HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable
7 m (22.97 ft)
JL288A
HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable
10 m (32.81 ft)
JL289A
HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable
20 m (65.62 ft)
3 Installing an interface card in the expansion slot
IMPORTANT:
•
You can install an interface card in the expansion slot only after the LSXM1TGS24QGMODHB1
is installed on the switch.
•
To avoid interfering with interface card installation in the expansion slot, keep the ejector levers
of the LSXM1TGS24QGMODHB1 in the closed position.
To install an interface card in the expansion slot:
1.
Put your thumb and forefinger into the holes in the filler panel. Pressing the spring tab in the left
hole rightward with your thumb, pull the filler panel out of the slot.