2-12
Compaq StorageWorks SSL2000 Series Library Maintenance and Service Guide
When you press the Enter
Enter
Enter
Enter button, the following screen appears:
Unlock Code
£
“
¤
Using the
p
and the
q
button, set the first digit of the unlock code. Press the Enter
Enter
Enter
Enter button to
move the cursor to the second digit and repeat the process. Press the Escape
Escape
Escape
Escape button, then the
Enter
Enter
Enter
Enter button to confirm your entry. If the code is correct, the Main menu appears. If the code is
incorrect, an error screen appears.
Exiting the Menu Mode
To exit the Menu Mode and return to the Default screen, press the Escape
Escape
Escape
Escape button repeatedly.
Each time you press the Escape
Escape
Escape
Escape button, the display moves to a higher menu level. When the
Main menu appears, pressing the Escape
Escape
Escape
Escape button once returns to the Default screen. At this point,
the Ready LED lights.
Navigating through the Menu Structure
To select a submenu, move the
u
on the display to the desired line using the
p
and
q
buttons.
Press the Enter
Enter
Enter
Enter button to select your choice and display the submenu. The
¤
at the end of the
fourth line means you can scroll to additional configuration options with the
q
button.
The options available on the Main Menu are:
■
Load/Unload
■
Remove Magazine
■
Maintenance Menu
■
Configuration Menu
■
Security Menu
Load/Unload Menu
See “Loading and Unloading Tapes,”
later in this chapter.
Remove Magazine Menu
When you scroll to Remove Magazine and press the Enter
Enter
Enter
Enter button, the magazine door swings
open.
NOTE:
If the message Magazine
Locked appears on the screen, the host software has locked the
magazine. Exiting your backup or host management software usually releases the lock. (The host
management software should have a way to release the magazine without shutting down.) If the host
fails, you can cycle power to the Library to release the lock.
