P05957-002
Part replacement procedures
4-7
4.4
Part replacement procedures
4.4.1 Bridge board replacement
To replace a bridge board:
1. Power down the system.
2. Disconnect the system from power.
3. Remove the front top cover.
4. Remove the center brace.
5. Loosen the screw that secures the bridge board.
6. Lift the bridge board out of the chassis.
7. Remove the bridge board from the metal bracket.
8. Install the replacement bridge board in the metal bracket.
9. Insert the bridge board into the sockets on the motherboard and GPU interface board.
10. Tighten the screw that secures the bridge board.
11. Install the center brace.
12. Install the front top cover.
13. Connect power to the system.
14. Power up the system.
Summary of Contents for Apollo sx40
