•
The SAS BL Switch and the connected SAS storage are configured using drive bay zone
groups. The group of drive bays is presented to the c-Class enclosure blade port (server
bay) as if it was directly connected to that server bay.
NOTE:
Unpopulated drive bays in the storage enclosure can be included in a zone group,
to help plan for future growth.
•
The server bay that needs access to drive bays must be assigned to the appropriate zone
group.
◦
A server bay can be assigned multiple zone groups.
◦
A drive-bay zone group can be assigned to only one server bay.
◦
Unpopulated server bays can be assigned zone groups.
•
Disk drives in the storage enclosure are configured into logical units (LUNs) using host-based
configuration utilities such as HPE Array Configuration Utility (ACU).
Tape devices
When tape devices are attached to the switch:
•
The tape device is configured using switch port zone groups. The entire tape device
connected to that switch port is presented to all c-Class enclosure blade ports (server bays)
granted access to the zone group.
NOTE:
Unused switch ports can be included in a zone group, to help plan for future growth.
•
Server bays that need access to tape devices must be assigned the appropriate zone group.
◦
A server bay can be assigned multiple zone groups.
◦
A switch-port zone group can be assigned to more than one server bay.
◦
Unpopulated server bays can be assigned to a zone group.
Supported devices
7
