QuickSpecs
HPE FlexFabric 10Gb 2-port 534FLB Adapter
Overview
Page 1
HPE FlexFabric 10Gb 2-port 534FLB Adapter
The HPE FlexFabric 10Gb 2-port 534FLB adapter features the next generation of 10Gb Ethernet offering in a single chip solution on
a FlexibleLOM form factor, further reducing power requirements for 2 ports of 10Gb Ethernet. It is designed for use with HPE
BladeSystem c-Class Gen8 servers.
It provides full duplex high performance Ethernet connectivity with support for HPE Virtual Connect FlexFabric blade interconnect
technology, allowing each 10GbE port to be divided into four physical NICs and optimize bandwidth management for virtualized
servers. The HPE 534FLB FlexFabric network adapter, in conjunction with HPE Virtual Connect FlexFabric technology, helps to
extend the benefits of virtualization beyond the server and into the rest of the infrastructure.
The HPE 530FLB supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming
(bonding), tunnel offloads (NVGRE, VxLAN), Receive Side Scaling (RSS), jumbo frames and PXE boot. It also supports virtualization
features such as SR-IOV (Windows, Linux, VMWare), VMware NetQueue and Microsoft VMQ.
HPE FlexFabric 10Gb 2-port 534FLB Adapter
Models
HP FlexFabric 10Gb 2-port 534FLB Adapter
700741-B21
HP FlexFabric 10Gb 2-port 534FLB FIO Adapter
700742-B21
NOTE:
The HPE 534FLB on each server blade connects to a 10Gb interconnect in bays 1-2 (HPE
BladeSystem c7000 Enclosure) or bay 1 (HPE BladeSystem c3000 Enclosure).
NOTE:
The 534FLB requires a minimum of 2 GB of server memory.
NOTE:
The 534FLB supports linking at 1000Mbps or 10000Mbps when not connected to a Flex-10 device.
NOTE:
The 534FLB will only support 1000Mbps when connected to a 1Gb Ethernet interconnect.
Kit Contents
•
HPE FlexFabric 10Gb 2-port 534FLB Adapter
•
Quick install card